Fdb and Visoco Bdp.net For Sybase Ase Software for Windows

Interface Traffic Indicator
$0 - Carsten Schmidt

Interface Traffic Indicator, inftraf.exe
Software by Carsten Schmidt

If you like this software, please consider donating. Follow the Paypal
link or Amazon wishlist at:


Please report bugs and feature requests to:
Carsten@CCSchmidt.de


What does it do and how does it work?
Inftraf is a tool that requests IN/OUT octet data (MIB2) from SNMP-capable
network interfaces. You can use this program in a professional network
environment to monitor selected network interfaces (even backplane ports
if the device provides the information) or you can monitor your home network
or cable/modem/ISDN connection to the internet. You can monitor bits/sec,
utilization and accumulated traffic.

Enter IP address and SNMP read community into the fields and click on FIRST
CONTACT. The program will then try to retrieve all interface information of
the device. If successful, this will enable the START POLLING button. Select
a polling interval and an interface and start polling.
Values in graph are calculated and shown as either bits or bytes per second
or utilization in percent. Just select the appropriate graph.
Error messages are shown in the statusbar at the bottom.
Other functions provided:
- Show device information
- Reset all values and graphs
- Options dialog
- Two log variations: normal log also shown in GUI and a debug log that shows
all polling information that was retrieved. Both can be written to files.

---

---

MultiPing Grapher
$0 - Carsten Schmidt

MultiPing Grapher, Multiping.exe
Software by Carsten Schmidt

If you like this software, please consider donating. Follow the link:


Please report bugs and feature requests to:
Carsten@CCSchmidt.de


How does it work and what does it do?
MPG is a further development of Perfping with the ability to graph
up to 10 different ICMP results.
()

Start the program, use File|Open host file to open a text file with a
list of maximum of 10 IP addresses.
You can also start the program with a host list as starting parameter.
E.g. Multiping.exe hosts.txt

Using predefined host lists, MPG will give you a fast way of checking
multiple connections immediately when you suspect trouble. Comparison
of the different results will give you an indication of where to look
first.
You may also adjust ping interval and ICMP payload (size of the data
portion of the ICMP packet) to fit your needs.

---

---

Multiple Interface Watcher
$25 - Carsten Schmidt

Multiple Interface Watcher, MIW.exe
Version 1.1.0; April2005
Shareware by Carsten Schmidt

If you like this software and continue using it, please buy it. The price
is only 20 Euro. Follow the Paypal link on the webpage


Be sure to send your correct email address. It will be used as a user ID
and the registration code will be send to this address.

Please TRY BEFORE YOU BUY. No refunds will be given.

Please report bugs and feature requests to:
Carsten@CCSchmidt.de


How does it work and what does it do?

Generate a file with a list of devices that you want to monitor. Each line
in that file must follow the format given in the example file '
example_devices.txt':
;;;;.
Do not use more than 10 lines.

Start MIW and open your device file. You will see that a number of graphs
have changed their colour, they are now activated with your information.
Click on 'Start polling' to start the monitoring. The

Options
There are two places to change options: either by clicking on 'Show more'
which expands the GUI to show polling intervall and other options or you
select ToolsOptions from the menu to change graph behaviour.
All of the options are self explanatory like 'stay on top' and polling intervall.
If not, just try them out.

---

ServiceWatchdog
$0 - Carsten Schmidt

ServiceWatchdog, servicewatchdog.exe
Version 1.0, May 2007
Software by Carsten Schmidt

If you like this software, please consider donating. Follow the Paypal
link or Amazon wishlist at:


Please report bugs and feature requests to:
Carsten@CCSchmidt.de


What does it do and how does it work?
If you have problems with a service that does not start automatically after
a reboot because needed resources are not online yet, this software fixes
just this problem.
The name of this program is a little bit misleading but I could not come up
with something better. "Delayed service starter" would describe it better.

The ServiceWatchdog is started automatically after a reboot. After a predefined
time interval, this service tries to start a defined service. It will try to
start the service twice and then it gives up. No logs, event messages or other
information is written.


Installation
1. Install the service with the command "servicewatchdog /install"
Uninstall the service with the command "servicewatchdog /uninstall"

2. Start and stop the service in Computer Management. This creates the
needed registry keys.

3. Start regedit and select "HKEY_LOCAL_MACHINESoftwareCCSchmidtServiceWatchdog"
Edit the 3 keys according to your needs:
Servicename = service name of the service to be started (e.g. Clipsrv for
clipbook)
Interval = time interval between start of ServiceWatchdog and start of the
selected service in ms. Default is 300000 (5 minutes).
Active = run ServiceWatchdog or not. Possible values are "yes" and "no".
Default is "yes". (no surprises here).

Check that startup type of ServiceWatchdog is automatic.


Version history

Version 1.0, May 2007
First release

---

Altova DatabaseSpy
$129 - Altova, Inc.

Altova DatabaseSpy 2008 is the unique multi-database data management, query, and design tool from the creators of XMLSpy. DatabaseSpy connects to all major databases, easing SQL editing and database structure design, for a fraction of the cost of single-database solutions. DatabaseSpy provides a straightforward database connection wizard and organizes connections and related project files to make accessing your databases and their components effortless. You can even open connections to multiple databases at once. It clearly presents tables, views, stored procedures, and data in easily negotiable windows, and it also lets you directly edit database content. DatabaseSpy's SQL Editor facilitates query writing with capabilities like code completion, syntax coloring, drag & drop editing, and more. You can easily write SQL scripts that retrieve data from multiple tables, and results can be displayed in individual, named windows for maximum clarity. DatabaseSpy's powerful Database Design Editor enables graphical design and visualization of database structures or schemas. You can also use it to duplicate existing structures in differing database types. DatabaseSpy supports IBM DB2 (including IBM pureXML databases), Microsoft SQL Server, Microsoft Access, Oracle, MySQL, and Sybase, as well as other ADO or ODBC databases. XML support includes advanced capabilities to inspect XML data in database tables and to manage the XML Schemas used to validate that data. It exports data in five formats, including XML, XML Structure, CSV, HTML, and Excel, and it imports data from CSV files. With all this capability and more, DatabaseSpy is sure to save you time, simplify your work, and ensure accuracy for all your data. It is the one tool to finally liberate data management. Do data differently! Download Altova DatabaseSpy 2008 today, and try it free for 30 days.

---

VISOCO BDP.NET for Sybase ASE
$99.95 - VISOCO Software

VISOCO BDP.NET for Sybase ASE is a BDP.NET provider that allows a developer to get direct access to Sybase ASE from applications based on Borland Delphi and C# Builder.

VISOCO BDP.NET for Sybase ASE implements all interfaces and objects required by the Borland Data Providers for .NET technology, such as ISQLConnection, ISQLCommand, ISQLCursor for basic runtime data-access functionalities and ISQLMetaData, ISQLSchemaCreate and the ISQLResolver interfaces.

VISOCO BDP.NET for Sybase ASE provides:

* High performance data-access architecture
* Easy installation and distribution
* Extended ADO.NET architecture
* Advanced interfaces for metadata, schema creation, data migration

VISOCO BDP.NET for Sybase ASE directly supports Borland Delphi for .NET 8 and Borland C# Builder 8 and is developed in C# with 100% managed code.

VISOCO BDP.NET for Sybase ASE costs from $99.95, has flexible prices and doesn't require
any additional royalty fees.

---