



* Multi-protocol network boot disk for Realtek * Functions as PXE / DHCP / BOOTP, RPL or NetWare Boot ROM * Extra features and options over PXE Boot Image * Quickly install OS using tools like emBoot NBT * 8100B, 8139, 8139C+, 8139D chipsets
Embedded Windows CE Speaker Verification Developers Kit is your compact security solution for Development of Speaker Verification Systems at Electronics level. The design is based on ISIP ASR and is Ported to Windows CE/Pocket PC/Smart Phone/ Symbian
Complete package of services and applications required to setup a Windows network booting environment, including: PXE, BOOTP, and TFTP services, Boot Image Editor, Client boot parameter database editor (BOOTPTAB Editor), DOS-based pre-OS utilities
* Multi-protocol network boot disk/ virtual floppy image for VMs * Functions as PXE / DHCP / BOOTP, RPL or NetWare Boot ROM * Extra features and options over PXE Boot Image * Quickly install guest operating systems using tools like emBoot NBT

PXE Boot Image for VMware, floppy image
$9 - emBoot Incorporated
emBoot's boot agents for VMware are client-based 'virtual' firmware that allows a VMware client VM to do a "network boot? using the virtual NIC. Our boot agents for VMware are fully compliant with the Intel Wired for Management - Preboot Execution Environment (PXE) specification. PXE is the defacto industry standard protocols/APIs for network booting.
By working closely with VMware and key VMware customers, emBoot has overcome limitations with 'other' PXE implementations that simply do not work under VMware virtual machines (VM).
* PXE Boot Image for VMware - Bootable floppy image functions as a PXE Boot ROM
* Fastest way to PXE Boot your VM Guest Operating System! Simply extract the provided .FLP file to your image files directory, point your floppy device to the .FLP and then set your VM to boot from the floppy device.
* Ideal for quickly installing guest operating systems using WfM-enabled desktop tools like emBoot NBT

Bootpart
$0 - Gilles Vollant
BootPart is an easy tool for adding one partition in the Windows NT multi boot menu (by samples, OS/2 boot manager or Linux partition).
Bootpart 2.60 is compatible with Windows NT, Windows 2000 and Windows XP.
BOOTPART lets you add partitions in the Windows NT/2K/XP Multiboot menu. Usually, you only have an MSDOS or Windows 95 entry and one (or several) entries on the Windows NT multiboot.
With BOOTPART, you can add any partition on the menu. You can add OS/2 Multiboot, or Linux Partition (with Lilo) in the menu.
You can also restore the Dos, Windows 95/98/Me or NT Bootloader boot sector on Fat partition.
BOOTPART creates a 512 bytes file which contains an image of a boot sector that loads the boot sector of the partition. After, this file is declared in C:BOOT.INI (a text file used by Windows NT boot menu). The boot sector comes from FDFormat and WinImage.
The version 2.60 has now very cool feature : repair Windows NT loader boot sector on Fat partition (but Bootpart cannot the repair under Windows NT/2K/XP), easily add both MS-Dos 6.22 and Windows 95 in boot menu, support FAT32 and disk over 4 GB, and LBA addressing...

JustBoot Boot Corrector
$19.95 - Paragon Software Group
Boot Corrector is a system utility designed to resolve various problems which users may encounter during the system boot process. These problems may be caused by program errors or user mistakes, or become the results of boot virus activity.
Here is the list of operations that Boot Corrector provides to counter main boot problems:
1. Searches for valid Windows installations (Windows 2000/XP/Server 2003).
2. Corrects drive letters in the System Registry of a selected Windows installation.
3. Edits the Boot.ini file of a selected Windows installation.
4. Updates the MBR executable code.
5. Reorders primary partitions (change primary slots).
6. Corrects the boot record for a selected Windows installation (increments the Serial Number, corrects the partition offset, makes a copy of the boot record, corrects the Bootsect.dos file if exists).
7. Sets the active partition.
8. Hides/unhides partitions. 9. Changes Serial Numbers.
10. Changes Partition IDs.
11. Displays the Master Boot Record (MBR) in the understandable form.
12. Displays partition properties.
13. Creates the boot correction report, displays, saves and prints it.

BOOTSave
$10 - Canadian Mind Products
BootSave saves/restores the master boot sector on the
hard disk. Suite of three utilities BootSave, BootRest and
BootChk. Protects against damage to the partition table or
boot sector done by rogue programs, viruses or accidents
with tools like Norton NU.
The BootSave suite will work under DOS, Windows 3.x, Windows
95/98/ME, OS/2, but not NT, Windows 2000, XP, or Vista.
These OSes block low level disk I/O as a security measure.
You should temporarily boot from a DOS diskette to save or
restore. You can save the boot record under Win2K/XP (but
not Vista) but you must boot under DOS to do the restore.
This version does NOT save the boot sectors for each
individual partition, just the MBR (master boot record) that
contains the primary booting code, and the partition
information for the four primary partitions. Have a look at
Acronis or Boot-It for a complete backup.
You must use
BootSave PRIOR to damaging your hard disk to be of any use!

Crypto4 PKI
$24.95 - EldoS Corporation
Crypto4 PKI is set of tools designed for management of X.509 certificates, Certificate Revocation Lists and Certificate Signing Requests.
1. Certificate Generator is a wizard-like application that lets you generate certificates and certificate requests.
Certificate Generator can create both self-signed certificates and certificates, signed by other (CA) certificates. Certificate can be built from scratch (when you enter all information manually) or using pre-generated Certificate Request. Certificate Generation Profiles are used to generate more than one certificate based on common template.
Certificate Generator lets you specify algorithms and key length, intended uses of certificates and Certificate Revocation List location. You can save the certificate in CER, PEM (base64-encoded DER), PFX (PKCS#12) and SPC/PVK formats.
2. Certificate Converter lets you take a certificate (and, if needed, private key) in one format and save it in other format. Certificate conversion is a frequent task since various applications use different formats.
Supported certificate formats are CER (standard DER format), PEM (base64-encoded DER), PFX (PKCS#12) and P7B/SPC (PKCS#7).
Supported private key formats are CER (standard DER format), PEM (base64-encoded DER), PFX (PKCS#12) and PVK.
3. Certificate Manager lets you easily browse Windows Certificate storages and manage certificates.
With Certificate Manager you can export and import certificates in DER, PEM, PFX and SPC/PVK formats. You can view certificate files in all supported formats without importing them into Windows storage. You can also save certificate files in another format, thus doing format conversion of the certificate.
Certificate Manager lets you easily locate and delete unnecessary certificates.
4. With CRL Manager you can create, modify and search Certificate Revocation Lists and check their signatures.

Ateksoft CoolCamera
$17.9 - Ateksoft Co,ltd
Ateksoft CoolCamera - the program to take pictures and video on PDA-phones like I-mate JAM, MDA Compact, QTEK S100/S110, O2 XDA mini, Orange SPV M500, Dopod 818 and many other.
Ateksoft CoolCamera key features:
- High frame rate (up to 25 fps) and smooth video. Efficient encoding algorithm utilize your processor at maximum!
- Easy camera control. All actions can be performed using hardware buttons only.
- Camera adjustment without leaving view-finder mode.
- Interval picture capturing.
- High resolution (up to 1280x960) video in Motion Jpeg AVI format.
- Pause/resume video recording process
© 2007-2008 Software Institute
Software Institute periodically updates pricing and product information from third-party sources,
so some information may be slightly out-of-date. You should confirm all information before relying on it.