Turbocad and Mitcalc - Bevel Gear Calculation Software for Windows

MITCalc - Pinned couplings
$14 - MITCalc

The calculation is intended for the geometric design and strength check of couplings using pins and clevis pins.
The program is used to solve the following tasks: design of pin for spring attachment, design of couplings with
securing pins, design of cross pin in rod and sleeve, design of radial pin for shaft-hub connection, design of
longitudinal pin for shaft-hub connection, design of clevis pin for rotating rod-clevis connection, strength check of
designed couplings. The program includes dimensional tables for pins and clevis pins according to ANSI, ISO, DIN,
BS, JIS and CSN. Support of 2D CAD (AutoCAD, AutoCAD LT, IntelliCAD, Ashlar Graphite, TurboCAD).Related
standards: ANSI B18.8.1, ANSI B18.8.2, ISO 2338, ISO 2339, ISO 2340, ISO 2341, ISO 8733, ISO 8734, ISO
8735, ISO 8739, ISO 8740, ISO 8741, ISO 8742, ISO 8743, ISO 8744, ISO 8745, ISO 8746, DIN 1, DIN 7, DIN
1443, DIN 1444, DIN 1470, DIN 1471, DIN 1472, DIN 1473, DIN 1474, DIN 1475, DIN 1476, JIS B 1352, JIS B
1354, JIS B 1355, BS EN 22339, BS EN 22340, BS EN 22341, CSN EN 22339, CSN EN 22340, CSN EN 22341.
This module is a part of MITCalc - Mechanical and Technical Calculation Package for gear, belt and chain drives,
bearings, springs, beam, shaft, bolt connection, shaft connection, tolerances and many others.

---

---

MITCalc - Shaft connection
$19 - MITCalc

Geometric designs and strength checks of shaped connections of shafts with hubs. Application is developed in MS
Excel, is multi-language and supports Imperial and Metric units and solves the following main tasks:
- Design of a connection with parallel side keys.
- Design of a connection with Woodruff's keys.
- Design of a connection with straight-sided splines.
- Design of a connection with involute splines.
- Strength check of designed couplings.
- The application includes a table of keys and splines according to ISO, SAE, DIN, BS, JIS and CSN.
- Support of 2D CAD systems (AutoCAD, AutoCAD LT, IntelliCAD, Ashlar Graphite, TurboCAD).
Used standards: ANSI B17.1, ANSI B17.2, ANSI B92.1, ANSI B92.2M, ISO R773, ISO 14, ISO 4156, DIN 6885,
DIN 6888, DIN 5464, DIN 5471, DIN 5472, DIN 5480, BS 4235, BS 6, JIS B 1301, CSN 02 2562, CSN 30 1385,
CSN 01 4942, CSN 4950.
This module is a part of MITCalc - Mechanical and Technical Calculation Package for gear, belt and chain drives,
springs, beam, shaft, bolt connection, shaft connection, tolerances and many others.

---

---

MITCalc - Shafts Calculation
$19 - MITCalc

The calculation is designed for geometrical design and complex strength check of shafts.
Application is developed in MS Excel, is multi-language, supports Imperial and Metric units and solves the following
main tasks:
- Simple definition of installed shafts, including hollow ones.
- Options of definitions of necking-down, recesses, grooves and calculation of the relevant coefficients of stress
concentration.
- Simple definition of spatial shaft load.
- Calculation of reactions, courses of forces, moments, stress, deflection and bending angle of the shaft and others.
- Calculation of critical speed and safety coefficients.
- Support of 2D CAD (AutoCAD, AutoCAD LT, IntelliCAD, Ashlar Graphite, TurboCAD) and 3D CAD in full
calculation package (Autodesk Inventor, SolidWorks, SolidEdge, Pro/E).
The calculation is based on data, procedures, algorithms and data from specialized literature and standards AGMA,
ISO, DIN and BS. List of standards (DIN 743).This module is a part of MITCalc - Mechanical and Technical
Calculation Package for gear, belt and chain drives, springs, beam, shaft, bolt connection, shaft connection,
tolerances and many others.

---

MITCalc - Spur Gear Calculation
$24 - MITCalc

Geometric design and strength check of spur gear with straight and helical toothing. Application is developed in MS
Excel, is multi-language and supports Imperial and Metric units and solves the following main tasks:
- Calculation of helical and straight toothing (external).
- Automatic design of a transmission with the minimum number of input requirements.
- Design for entered coefficients of safety (static, dynamic).
- Calculation of complete geometric parameters (including corrected toothing).
- Optimization of toothing by use of proper correction (balancing specific slips, miminizing specific slips, strength...).
- Calculation of strength parameters, safety check.
- Design of gearing for exact axis distance.
- Supplementary calculations (calculation of parameters of the existing gear, temperature rise, design of shafts,
check dimensions).
- Support of 2D and 3D CAD systems.
- Drawings of an accurate tooth shape including data (X,Y coordinates).
- Support of 2D CAD (AutoCAD, AutoCAD LT, IntelliCAD, Ashlar Graphite, TurboCAD) and 3D CAD in full
calculation package (Autodesk Inventor, SolidWorks, SolidEdge, Pro/E). The calculations use procedures,
algorithms and data from
standards ANSI, ISO, DIN, BS and specialized literature. Used standards: ISO 6336, ISO 1328, DIN 3990, ANSI
B6.1-1968, AGMA 2001-C95, AGMA 2001-D04, AGMA 908-B89/95 and others.This module is a part of MITCalc -
Mechanical and Technical Calculation Package for gear, belt and chain drives, springs, beam, shaft, bolt
connection, shaft connection, tolerances and many others

---

MITCalc - Worm Gear Calculation
$24 - MITCalc

Geometric design and strength check of worm gear. Application is developed in MS Excel, is multi-language and supports Imperial and Metric units and solves the following main tasks:
- Calculation of gearing dimensions.
- Automatic transmission design with minimum input requirements.
- Design for safety coefficients entered.
- Calculation of a table of proper solutions.
- Calculation of complete geometrical parameters.
- Calculation of strength parameters, safety check.
- Gearing design for precise centre-line distance.
- Auxiliary calculations (heating, shaft design).
- Support of 2D and 3D CAD systems.
- Support of 2D CAD (AutoCAD, AutoCAD LT, IntelliCAD, Ashlar Graphite, TurboCAD) and 3D CAD in full
calculation package (Autodesk Inventor, SolidWorks, SolidEdge, Pro/E). The calculations use procedures,
algorithms and data from standards ANSI, ISO, DIN, BS and specialized literature. Used standards: ANSI/AGMA 6022-C93 (Revision of AGMA 341.02), ANSI/AGMA 6034-B92 (Revision of ANSI/AGMA 6034-A87), DIN 3996, DIN 3975-1, DIN 3975-2 and others. This module is a part of MITCalc - Mechanical and Technical Calculation Package for gear, belt and chain drives, springs, beam, shaft, bolt connection, shaft connection, tolerances and many others

---

MITCalc3D for SolidWorks
$79 - MITCalc

MITCalc is a multi-language set of mechanical, industrial and technical calculations for the day-to-day routines. It will
reliably, precisely, and most of all quickly guide customer through the design of components, the solution of a
technical problem, or a calculation of an engineering point without any significant need for expert knowledge.
MITCalc contains both design and check calculations of many common tasks, such as: spur and bevel gear, belt
and chain gear, bearings, beam, buckling, shaft, springs, bolt connection, shaft connection, tolerance analysis,
tolerances and many others. There are also many material, comparison, and decision tables, including a system for
the administration of resolved tasks. The calculations support both Imperial and Metric units and are processed
according to ANSI, ISO, DIN, BS, CSN and Japanese standards.It is an open system designed in Microsoft Excel
which allows not only easy user-defined modifications and user extensions without any programming skills, but also
mutual interconnection of the calculations, which is unique in the development of tailor-made complex calculations.
The sophisticated interaction with many 2D (AutoCAD, AutoCAD LT, IntelliCAD, Ashlar Graphite, TurboCAD) and
3D (SolidWorks) CAD systems allows the relevant drawing to be developed or 3D models to be inserted in a few
seconds. OEM licensing of selected calculations or the complete product is available as well.

---