Ventafax and Remodelcost Estimator For Excel Software for Windows

Modelbouw Helicopter
$0 - www.Dobola.com

www.Dobola.com - Alles over Modelbouw Helicopters, Helikopters, Modelbouw Vliegtuigen, Modelbouw Vliegtuig, Model Vliegtuigen, Modelbouw Auto, Modelbouw Autos, Boten Modelbouw, Modelbouw Online, Modelbouw Forum, Modelbouw RC, Modelbouw Treinen, Modelbouw Winkels, Modelbouw Winkel, Modelbouw Trein, Plastic Modelbouw, Modelbouw Brandstof, Modelbouwen, Vrachtwagen Modelbouw, Modelbouw Club, Modelbouw Vliegvelden, Alles over Modelbouw www.Dobola.com

---

---

ModemTest
$15 - PassMark Software

ModemTest is an easy to use Windows based application that allows users to test their dial up modem. ModemTest performs low level testing that is independent of your Internet Service Provider (ISP) and the TCP/IP settings on the computer. It allows the modem to be tested in addition to the phone line the modem is connected to. ModemTest provides a method for system integrators and computer repair centers to test both internal and external modems. By a process of elimination, home users can also use the ModemTest to help isolate Internet connection problems to a faulty modem, or phone line or their ISP service. ModemTest logs any data corruption and incorporates a modem speed test which reports the initial connection speed and the actual throughput.
Two different test methods are provided. The first test method uses two telephone lines and two modems in a master / slave configuration. The master dials the phone number of the slave modem and after a successful connection, data packets are exchanged between the master and slave. The second test method requires only a single modem and no telephone line. A local loop back is done on the analog side of the modem, ModemTest then sends data packets which are echoed back by the modem. In both cases ModemTest communicates to the modem using a COM port. (In the case of Internal modems or USB modems, this is a virtual COM port and not a physical plug on the machine).
Modem Test allows the sending of specific data files allowing compliance to specific standards, for instance ITU-T v.56.
Before sending any data, ModemTest first checks the settings on the serial port and then on the modem itself. Any data received is verified to be sure that it is complete and without errors. A log of the activity is kept in the right hand section of the window. Different types of activities are highlighted in different colors. Any errors are displayed in red. This log can be saved to disk if required.

---

---

PanoModules
$0 - PanoModules team

The kit of modules to create and manage interactive virtual tours on web sites.

Creation
1. Build complex virtual tour with your favorite HTML and CSS tools only within typical web design workflow.
2. There are no restrictions for layout, structure, and visual style of a virtual tour. Modules have no fixed make-up, size, or position, so you can organically build them into any web page and create any visual style with CSS.
3. You don't need sophisticated HTML or scripting. All functionality and interaction mechanism are completely encapsulated in modules.

Management
1. Manage content of your virtual tour online in-place. Modules have embedded content management system. Its server-side part is open, so you can freely adapt it.
2. Edit your virtual tour without changing HTML code. All content and preferences are described in XML files with simple, readable, and editable format.
3. Rebuild your virtual tour, remove, or add new modules without changing existing content. New and upgraded modules are free for download.

Entertainment
1. Panoramas and maps can contain hotspots with different actions performed by click. You can attach any image or Flash file as hotspots, assign actions, "bubble tips" and visual effects for each hotspot separately.
2. Compensatory distortion for cylindrical panoramas allows displaying correct panoramic view. You can tune it visually and interactively.
3. Panoramic module can be used as slide-show and display usual non-panoramic images (just consider them as narrow-angled panoramas). Hotspots are still fully available in this mode.
4. Map module can display dynamic field of vision related to current view in panoramic module.

Advanced
Interaction with JavaScript gives more customizing possibilities for advanced developers. You can start some modules actions via simple JavaScript calls (for example, with use of standard UI controls) and receive calls from any module when some event occurred in it.

---

Virtual Null Modem
$74 - AGG Software

Null-modem cable is basically used for communication of two RS-232 DTE devices with each other. To create null-modem connection between the devices you need to use two computers or two serial ports of a single computer connected with null-modem cable. The both methods described above are expensive and difficult because of many reasons. The most reliable way to create null-modem connection is using of virtual serial ports emulated by virtual serial port driver and null-modem cable. Why do you need to emulate serial ports and null-modem connection? There are few main reasons to do it. Firstly, you don't need to have two computers connected with real null-modem cable. Secondly, there?s no need in a single PC with several free serial ports and additional multi serial port devices which are expensive and bulky. To emulate null-modem connection Virtual Null Modem can be effectively used. The program emulates one or more couples of RS-232 serial ports connected via virtual null-modem cable. It is possible to create the unlimited couples of virtual serial ports on a single PC and connect them in any sequence using virtual null-modem cable. Usually you need to use virtual null-modem when you have two applications to be connected via serial ports. In contrast to ordinary connection you do not need any additional hardware (computers, physical serial ports, cables) to perform it. Virtual null-modem allows user emulate virtual null modem connection and run the two applications simultaneously on the same computer. Moreover, it is possible to emulate real-world situations by adding some errors to the data exchange which may occur during the physical null-modem connection. Owing to its features set Virtual Null Modem can sufficiently ease the work of software developers and testers occupied in the field of industrial automation. Furthermore, the program may also be useful in the reverse engineering as well as in educational needs. So go ahead and download FREE trial version now!

---

Mobdus Constructor
$50 - KurySoft

Using Modbus Constructor you can quickly create a data management model for any of your Modbus devices. Unlike other available solutions on the market which provide displaying data as columns of abstract numbers of the same type, Modbus Constructor represents each data element exactly as you need. You may define type, format or scale independently. This makes them easy to read and analyze.
In Modbus Constructor you can work with integer, long, float, double, or byte data types. Integer types may be represented as signed, unsigned, HEX or binary. The same register can be represented in various ways. For example, if there are two adjacent registers that contain long numbers, each of these registers can be given additional data fields in which their content will be represented as HEX or unsigned integer.
Data fields corresponding to your data elements (registers or discreet elements) can be arranged to your liking inside the project form window. You can specify size, color, font and caption for each field.
The discreet elements occupying a continuous addresses domain can share the same field, which makes them easier to read and saves time.
In Modbus Constructor you can setup any register data field to perform a linear transformation to convert the internal units into units of any system. For example, if a register contains pressure in mA, i.e. the device receives data from a pressure detector equipped with a current output, the resulting value can be converted to kgf/cm2 or lb/in2.
Modbus Constructor supports automatic requests for all supported functions (01, 02, 03, 04, 05, 06, 15, 16, 22, 23) with individual periods for each one.
You can setup requests to be executed via menus or dialogs. This is a convenient way of setting up control commands, changing parameters and test requests. Any project may be used for querying a device in a Master mode or simulating it in a Slave mode. For the Slave mode you may additionally include a data modification procedure operating according.

---

RemodelCost Estimator for Excel
$55 - CPR International, Inc.

Discover convenience and time-savings while increasing your bidding success.
Remodel Construction Cost Estimating System for Excel. Designed specifically for home remodelers, builders, cost estimators and architects. RemodelCOST Estimator contains extensive industry standard user-modifiable unit cost data for all cost categories covering remodel construction as well as local city indexes that automatically adjusts costs for local geographic area. RemodelCOST Estimator instantly creates user-modifiable, on-screen or printed estimate reports including price quotation. Use RemodelCOST Estimator as an estimating or sales tool to save time, improve accuracy and achieve greater success.
RemodelCOST Estimator is designed and developed in the USA by CPR International, Inc., a leading provider of cost estimating software tools and cost data for the construction industry since 1986. Use RemodelCOST Estimator with confidence and profit!

---